Linux version 2.6.0-test4 (hanishkvc@debian-hanishkvc) (gcc version 2.95.4 20011002 (Debian prerelease)) #11 Mon Aug 25 23:10:58 IST 2003 Video mode to be used for restore is f00 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000fff0000 (usable) BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS) BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 255MB LOWMEM available. On node 0 totalpages: 65520 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 61424 pages, LIFO batch:14 HighMem zone: 0 pages, LIFO batch:1 DMI 2.2 present. ACPI disabled because your bios is from 2000 and too old You can enable it with acpi=force ACPI: RSDP (v000 VIA694 ) @ 0x000f69d0 ACPI: RSDT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3000 ACPI: FADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3040 ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000 ACPI: MADT not present Building zonelist for node : 0 Kernel command line: ro root=/dev/hdb7 Local APIC disabled by BIOS -- reenabling. Found and enabled local APIC! Initializing CPU#0 PID hash table entries: 1024 (order 10: 8192 bytes) Detected 600.036 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 1175.55 BogoMIPS Memory: 256164k/262080k available (1466k kernel code, 5188k reserved, 755k data, 212k init, 0k highmem) Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) -> /dev -> /dev/console -> /root CPU: After generic identify, caps: 0183fbff c1c7fbff 00000000 00000000 CPU: After vendor identify, caps: 0183fbff c1c7fbff 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 64K (64 bytes/line) CPU: After all inits, caps: 0183fbff c1c7fbff 00000000 00000020 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: AMD Duron(tm) Processor stepping 00 Enabling fast FPU save and restore... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 599.0574 MHz. ..... host bus clock speed is 199.0857 MHz. PM: Adding info for No Bus:legacy Initializing RT netlink socket EISA bus registered PCI: PCI BIOS revision 2.10 entry at 0xfb340, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) BIO: pool of 256 setup, 14Kb (56 bytes/bio) biovec pool[0]: 1 bvecs: 256 entries (12 bytes) biovec pool[1]: 4 bvecs: 256 entries (48 bytes) biovec pool[2]: 16 bvecs: 256 entries (192 bytes) biovec pool[3]: 64 bvecs: 256 entries (768 bytes) biovec pool[4]: 128 bvecs: 256 entries (1536 bytes) biovec pool[5]: 256 bvecs: 256 entries (3072 bytes) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: the driver 'system' has been registered PnPBIOS: Scanning system for PnP BIOS support... PnPBIOS: Found PnP BIOS installation structure at 0xc00fbe10 PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xbe40, dseg 0xf0000 PM: Adding info for No Bus:pnp0 PM: Adding info for pnp:00:00 PM: Adding info for pnp:00:01 PM: Adding info for pnp:00:02 PM: Adding info for pnp:00:03 PM: Adding info for pnp:00:04 PM: Adding info for pnp:00:05 PM: Adding info for pnp:00:06 pnp: match found with the PnP device '00:07' and the driver 'system' PM: Adding info for pnp:00:07 pnp: match found with the PnP device '00:08' and the driver 'system' PM: Adding info for pnp:00:08 PM: Adding info for pnp:00:09 PM: Adding info for pnp:00:0a PM: Adding info for pnp:00:0c PM: Adding info for pnp:00:0d PM: Adding info for pnp:00:0e PM: Adding info for pnp:00:0f PnPBIOS: 15 nodes reported by PnP BIOS; 15 recorded by driver PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PM: Adding info for No Bus:pci0000:00 Disabling VIA memory write queue (PCI ID 0305, rev 02): [55] 89 & 1f -> 09 PM: Adding info for pci:0000:00:00.0 PM: Adding info for pci:0000:00:01.0 PM: Adding info for pci:0000:00:07.0 PM: Adding info for pci:0000:00:07.1 PM: Adding info for pci:0000:00:07.2 PM: Adding info for pci:0000:00:07.3 PM: Adding info for pci:0000:00:07.4 PM: Adding info for pci:0000:00:07.5 PM: Adding info for pci:0000:00:0d.0 PM: Adding info for pci:0000:00:14.0 PM: Adding info for pci:0000:01:00.0 PCI: Using IRQ router VIA [1106/0686] at 0000:00:07.0 spurious 8259A interrupt: IRQ7. pty: 256 Unix98 ptys configured VFS: Disk quotas dquot_6.5.1 Journalled Block Device driver loaded devfs: v1.22 (20021013) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x0 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). PCI: Disabling Via external APIC routing PM: Adding info for No Bus:pnp1 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Using anticipatory scheduling elevator Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 PM: Adding info for platform:floppy0 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx hda: SAMSUNG SV2044D, ATA DISK drive PM: Adding info for No Bus:ide0 hdb: SAMSUNG SV4084H, ATA DISK drive hdc: ASUS CRW-4012A, ATAPI CD/DVD-ROM drive PM: Adding info for No Bus:ide1 hdd: SAMSUNG COMBO SM-304B, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 PM: Adding info for ide:0.0 PM: Adding info for ide:0.1 ide1 at 0x170-0x177,0x376 on irq 15 PM: Adding info for ide:1.0 PM: Adding info for ide:1.1 hda: max request size: 128KiB hda: 39862368 sectors (20409 MB) w/472KiB Cache, CHS=39546/16/63 /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 p7 > hdb: max request size: 128KiB hdb: 79730784 sectors (40822 MB) w/426KiB Cache, CHS=65535/16/63 /dev/ide/host0/bus0/target1/lun0: p1 p2 p3 p4 < p5 p6 p7 p8 > mice: PS/2 mouse device common for all mice input: PS/2 Logitech Mouse on isa0060/serio1 serio: i8042 AUX port at 0x60,0x64 irq 12 input: AT Set 2 keyboard on isa0060/serio0 serio: i8042 KBD port at 0x60,0x64 irq 1 PM: Adding info for platform:eisa0 EISA: Probing bus 0 at eisa0 PM: Removing info for platform:eisa0 NET4: Linux TCP/IP 1.0 for NET4.0 IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 16384) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 212k freed Adding 265032k swap on /dev/hdb5. Priority:-1 extents:1 EXT3 FS on hdb7, internal journal Real Time Clock Driver v1.11a NTFS driver 2.1.4 [Flags: R/O MODULE]. SCSI subsystem initialized PM: Adding info for No Bus:ide-scsi scsi0 : SCSI host adapter emulation for IDE ATAPI devices PM: Adding info for No Bus:host0 Vendor: ASUS Model: CRW-4012A Rev: 1.0 Type: CD-ROM ANSI SCSI revision: 02 PM: Adding info for scsi:0:0:0:0 scsi1 : SCSI host adapter emulation for IDE ATAPI devices PM: Adding info for No Bus:host1 ide-scsi: abort called for 4 ide-scsi: reset called for 4 bad: scheduling while atomic! Call Trace: +00000002 [] schedule+0x3c/0x380 +00000009 [] schedule_timeout+0x7a/0xb0 +00000001 [] schedule_timeout+0x82/0xb0 +00000007 [] process_timeout+0x0/0x10 +00000003 [] idescsi_reset+0x56/0x100 [ide_scsi] +00000004 [] scsi_try_bus_device_reset+0x44/0x90 [scsi_mod] +00000006 [] scsi_eh_bus_device_reset+0x8f/0x120 [scsi_mod] +00000006 [] scsi_eh_ready_devs+0x17/0x50 [scsi_mod] +00000007 [] scsi_unjam_host+0x1b9/0x1d0 [scsi_mod] +00000021 [] scsi_error_handler+0x15a/0x1c0 [scsi_mod] +00000001 [] scsi_error_handler+0x0/0x1c0 [scsi_mod] +00000015 [] kernel_thread_helper+0x5/0x14 +00000003 hdd: ATAPI reset complete ide-scsi: abort called for 5 ide-scsi: reset called for 5 bad: scheduling while atomic! Call Trace: +00000002 [] schedule+0x3c/0x380 +00000009 [] schedule_timeout+0x7a/0xb0 +00000001 [] schedule_timeout+0x82/0xb0 +00000007 [] process_timeout+0x0/0x10 +00000003 [] idescsi_reset+0x56/0x100 [ide_scsi] +00000004 [] scsi_try_bus_device_reset+0x44/0x90 [scsi_mod] +00000006 [] scsi_eh_bus_device_reset+0x8f/0x120 [scsi_mod] +00000006 [] scsi_eh_ready_devs+0x17/0x50 [scsi_mod] +00000007 [] scsi_unjam_host+0x1b9/0x1d0 [scsi_mod] +00000021 [] scsi_error_handler+0x15a/0x1c0 [scsi_mod] +00000001 [] scsi_error_handler+0x0/0x1c0 [scsi_mod] +00000015 [] kernel_thread_helper+0x5/0x14 +00000003 hdd: ATAPI reset complete ide-scsi: abort called for 6 ide-scsi: reset called for 6 bad: scheduling while atomic! Call Trace: +00000002 [] schedule+0x3c/0x380 +00000009 [] schedule_timeout+0x7a/0xb0 +00000001 [] schedule_timeout+0x82/0xb0 +00000007 [] process_timeout+0x0/0x10 +00000003 [] idescsi_reset+0x56/0x100 [ide_scsi] +00000004 [] scsi_try_bus_device_reset+0x44/0x90 [scsi_mod] +00000006 [] scsi_eh_bus_device_reset+0x8f/0x120 [scsi_mod] +00000006 [] scsi_eh_ready_devs+0x17/0x50 [scsi_mod] +00000007 [] scsi_unjam_host+0x1b9/0x1d0 [scsi_mod] +00000021 [] scsi_error_handler+0x15a/0x1c0 [scsi_mod] +00000001 [] scsi_error_handler+0x0/0x1c0 [scsi_mod] +00000015 [] kernel_thread_helper+0x5/0x14 +00000003 hdd: ATAPI reset complete scsi scan: 55 byte inquiry failed with code 134217730. Consider BLIST_INQUIRY_36 for this device Vendor: SAMSUNG Model: COMBO SM-304B Rev: BS04 Type: CD-ROM ANSI SCSI revision: 02 PM: Adding info for scsi:1:0:0:0 kjournald starting. Commit interval 5 seconds EXT3 FS on hda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hdb3, internal journal EXT3-fs: mounted filesystem with ordered data mode. NTFS volume version 3.1. drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub ehci_hcd: block sizes: qh 128 qtd 96 itd 128 sitd 64 ohci-hcd: 2003 Feb 24 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ohci-hcd: block sizes: ed 64 td 64 drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1 PCI: Found IRQ 11 for device 0000:00:07.2 PCI: Sharing IRQ 11 with 0000:00:07.3 PCI: Sharing IRQ 11 with 0000:00:14.0 uhci-hcd 0000:00:07.2: UHCI Host Controller uhci-hcd 0000:00:07.2: irq 11, io base 0000d400 uhci-hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 drivers/usb/host/uhci-hcd.c: detected 2 ports uhci-hcd 0000:00:07.2: root hub device address 1 usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 drivers/usb/core/message.c: USB device number 1 default language ID 0x409 usb usb1: Product: UHCI Host Controller usb usb1: Manufacturer: Linux 2.6.0-test4 uhci-hcd usb usb1: SerialNumber: 0000:00:07.2 drivers/usb/core/usb.c: usb_hotplug PM: Adding info for usb:usb1 usb usb1: usb_new_device - registering interface 1-0:0 drivers/usb/core/usb.c: usb_hotplug hub 1-0:0: usb_probe_interface hub 1-0:0: usb_probe_interface - got id hub 1-0:0: USB hub found hub 1-0:0: 2 ports detected hub 1-0:0: standalone hub hub 1-0:0: ganged power switching hub 1-0:0: global over-current protection hub 1-0:0: Port indicators are not supported hub 1-0:0: power on to power good time: 2ms hub 1-0:0: hub controller current requirement: 0mA hub 1-0:0: local power source is good hub 1-0:0: no over-current condition exists hub 1-0:0: enabling power on all ports PM: Adding info for usb:1-0:0 PCI: Found IRQ 11 for device 0000:00:07.3 PCI: Sharing IRQ 11 with 0000:00:07.2 PCI: Sharing IRQ 11 with 0000:00:14.0 uhci-hcd 0000:00:07.3: UHCI Host Controller uhci-hcd 0000:00:07.3: irq 11, io base 0000d800 uhci-hcd 0000:00:07.3: new USB bus registered, assigned bus number 2 drivers/usb/host/uhci-hcd.c: detected 2 ports uhci-hcd 0000:00:07.3: root hub device address 1 usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 drivers/usb/core/message.c: USB device number 1 default language ID 0x409 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.0-test4 uhci-hcd usb usb2: SerialNumber: 0000:00:07.3 drivers/usb/core/usb.c: usb_hotplug PM: Adding info for usb:usb2 usb usb2: usb_new_device - registering interface 2-0:0 drivers/usb/core/usb.c: usb_hotplug hub 2-0:0: usb_probe_interface hub 2-0:0: usb_probe_interface - got id hub 2-0:0: USB hub found hub 2-0:0: 2 ports detected hub 2-0:0: standalone hub hub 2-0:0: ganged power switching hub 2-0:0: global over-current protection hub 2-0:0: Port indicators are not supported hub 2-0:0: power on to power good time: 2ms hub 2-0:0: hub controller current requirement: 0mA hub 2-0:0: local power source is good hub 2-0:0: no over-current condition exists hub 2-0:0: enabling power on all ports PM: Adding info for usb:2-0:0 hub 1-0:0: port 1, status 100, change 3, 12 Mb/s hub 1-0:0: port 2, status 100, change 3, 12 Mb/s hub 2-0:0: port 1, status 100, change 3, 12 Mb/s hub 2-0:0: port 2, status 100, change 3, 12 Mb/s hub 1-0:0: port 1 enable change, status 100 hub 1-0:0: port 2 enable change, status 100 hub 2-0:0: port 1 enable change, status 100 hub 2-0:0: port 2 enable change, status 100 drivers/usb/host/uhci-hcd.c: d400: suspend_hc drivers/usb/host/uhci-hcd.c: d800: suspend_hc ip_tables: (C) 2000-2002 Netfilter core team ip_conntrack version 2.1 (2047 buckets, 16376 max) - 304 bytes per conntrack PCI: Found IRQ 5 for device 0000:00:07.5 PCI: Setting latency timer of device 0000:00:07.5 to 64 apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) pnp: the driver 'parport_pc' has been registered pnp: match found with the PnP device '00:0f' and the driver 'parport_pc' parport0: PC-style at 0x378 [PCSPP,EPP] parport0: cpp_daisy: aa5500ff(38) parport0: assign_addrs: aa5500ff(38) parport0: cpp_daisy: aa5500ff(38) parport0: assign_addrs: aa5500ff(38) parport_pc: Via 686A parallel port: io=0x378 lp0: using parport0 (polling). ntop uses obsolete (PF_INET,SOCK_PACKET)